Tag Archives: Luxury

Perfect Car For A Wedding #8 – Rolls Royce Phantom I Gurney Nutting #44KR

In 1925 Rolls Royce replaced the 40/50, retrospectively named as the Silver Ghost model that had been in production since 1906, with a model billed as the ‘New Phantom’.

Rolls Royce Phantom I Gurney Nutting Light Saloon, Rare Breeds, Haynes International Motor Museum

1926 saw production of the New Phantom commence at the Rolls Royce’s Springfield, Massachusetts works though the specification of the vehicles differed, the cars built in Derby all featured 4 wheel brakes with a servo assistance system built under license from Hispano Suiza.

Rolls Royce Phantom I Gurney Nutting Light Saloon, Rare Breeds, Haynes International Motor Museum

The New Phantom was powered by a 7668 cc / 467 cui straight six motor with a seven bearing crank shaft and with overhead valves that produced 100hp. Later models like this 1929 model were fitted with aluminium cylinder heads.

Rolls Royce Phantom I Gurney Nutting Light Saloon, Rare Breeds, Haynes International Motor Museum

The chassis of the New Phantom was similar to that of the 40/50 the UK models having up to 50 Enots Nipples requiring regular laborious lubrication from an Enots oil pressure gun, while US built New Phantoms had a Bijur centralized oiling system requiring a stroke from a single pump.

Rolls Royce Phantom I Gurney Nutting Light Saloon, Rare Breeds, Haynes International Motor Museum

Like all Rolls Royces of the time it was supplied as a rolling chassis sans body. The original owner of this car had the Gurney Nutting body from his existing Daimler moved to his New Phantom, apparently not an unusual practice at the time.

Rolls Royce Phantom I Gurney Nutting Light Saloon, Rare Breeds, Haynes International Motor Museum

Most UK built New Phantom chassis would have come with an exterior petrol gauge as can be seen inside the chassis rail here, US models mostly had their petrol gauges on the dash.

Rolls Royce Phantom I Gurney Nutting Light Saloon, Rare Breeds, Haynes International Motor Museum

The New Phantom was replaced in by the Phantom II in 1929, with the New Phantom being retrospectively renamed Phantom I. Chassis #44KR seen here at the Rare Breeds Show at Haynes International Motor Museum last year will have been one of the last Phanom I’s to be built, it belongs to special occasions hire specialists RRElite Ltd.

Thanks for joining me on this “Perfect Car For A Wedding #8” edition of “Gettin a li’l psycho on tyres”, I hope you will join me again tomorrow. Don’t forget to come back now !

Share

Cu Ghost – Rolls Royce Brockman 40/50

The Rolls Royce 40/50 launched in 1906, dubbed by Autocar the following year as “The best car in the world”, was only ever supplied as a chassis on to which a body would be individually crafted by an independent coach builders.

Rolls Royce Brockman 40/50, Hillsborough Concours d'Elegance

It is not known if, upon completion in Derby of today’s, today’s featured 1921 example was sent to a recommended Coachbuilder or straight to Dick Brockman and Company’s coach building works in Reading west of London.

Rolls Royce Brockman 40/50, Hillsborough Concours d'Elegance

The hand starter was merely a precaution on this chassis as electric lighting and starting was fitted to all 40/50’s from 1919 on.

Rolls Royce Brockman 40/50, Hillsborough Concours d'Elegance

The Spirit of Ecstacy also known as “Ellie in her Nightie”, was originally sculpted by Charles Sykes and made of chrome alloy was not adopted as an option until 1911, by all accounts Henry Royce was not a fan of the mascot and only agreed to it being offered as an option to dissuade his customers from using less suitable ornamentation.

Rolls Royce Brockman 40/50, Hillsborough Concours d'Elegance

Up until 1915 shiny brass, and nickle fittings were quite common but after the Great 1914/18 War these items tended to be painted.

Rolls Royce Brockman 40/50, Hillsborough Concours d'Elegance

Using .065″ copper sheet Dick Brockman and Company appear to have manufactured the body of this vehicle without resorting to either welding or riveting which would have been common practice.

Rolls Royce Brockman 40/50, Hillsborough Concours d'Elegance

This car, photographed by Geoffrey Horton at Hillsborough Concours d’Elegance earlier this year, is powered by an 80 hp 7428 cc / 453 cui six cylinder motor connected to a 4 speed manual gearbox.

Rolls Royce Brockman 40/50, Hillsborough Concours d'Elegance

Restoration of the car included replacing the dash board, front and rear screens along with the rear cockpit.

Rolls Royce Brockman 40/50, Hillsborough Concours d'Elegance

Once the restoration was completed the car won the 1991 Concours d’Elegance at Pebble Beach.

Rolls Royce Brockman 40/50, Hillsborough Concours d'Elegance

Many of the fitting were supplied by the Restoration Supply Company, Reno who carried out the restoration.

Rolls Royce Brockman 40/50, Hillsborough Concours d'Elegance

Despite it’s age this vehicle apparently has no problem keeping up with today’s traffic at ‘modern speeds’ with the smooth and silent performance that established the reputation of Rolls Royce as the manufacturers of the finest cars in the world from the beginning.

Rolls Royce Brockman 40/50, Hillsborough Concours d'Elegance

Friction dampers such as the one seen here were in common usage until the second half of the twentieth century when they were replaced with shock absorbing struts.

Rolls Royce Brockman 40/50, Hillsborough Concours d'Elegance

Opulent and refined this 40/50 represents the definition of what a hand crafted from nose to tail Rolls Royce should be, this car is regularly to be found in the National Automotive Museum in Reno.

Rolls Royce Brockman 40/50, Hillsborough Concours d'Elegance

Remarkably this is not the only copper bodied car by Dick Brockman and Company they were also responsible for building the body on a 1930 Rolls Royce Phantom II, Freestone & Wedd also built a copper bodied Rolls Royce on a pre owned 1937 Phantom III, other copper bodied cars include home made hand beaten 1920 Dodge now on view at the Southward Museum in Paraparaumu new Zealand. There are also two copper Cobra bodies one designed by Virgil M Exner in 1965 known as the Mercer Cobra, and the other a Kirkham Replica Cobra. Finally a supercharged rear engined Ford GT was fitted with a retro ’40’s copper hot rod body by Kirkham for the SEMA show in Las Vegas some years ago.

My thanks to Geoffrey Horton for sharing his photo’s of the Copper bodied Rolls Royce Brockman 40/50 copper Ghost.

Thanks for joining me on this “Cu Ghost” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again tomorrow. Don’t forget to come back now !

Share