Tag Archives: Engineering

MGJ Engineering Winter Stages Rally – Brands Hatch

After dropping off a nurse around 5am at a hospital in Plymouth a couple of weeks ago I got it into my head that I could just about make it home to Bristol swap my ambulance for my car and make it to Brands Hatch which was hosting the MGJ Engineering Winter Stage Rally in time for the 10:30 am start.

Ford Focus 05 WRC, Nigel Mummery, Fiona Scarrett, MGJ Engineering Winter Stages Rally, Brands Hatch

Despite the fact that it rained almost the entire 276 miles I made it just in time to see the #9 Ford Focus 05 WRC crewed by Nigel Mummery and Fiona Scarrett make a bit of a hash of the Druids Hairpin, which was being used in the opposite direction normally used circuit racing, on their way to a 35th place finish.

Darrian T9, Jeremy Straker, Simon May, MGJ Engineering Winter Stages Rally, Brands Hatch

As on the Brean Stages Rally a week earlier a Darrian T9 was present, in this case driven by Jeremy Straker with co driver Simon May seen above from the inside of Druids hairpin on their way to 64th place, last but one.

Peugeot 206, Mike Askew, James Baggott, MGJ Engineering Winter Stages Rally, Brands Hatch

The #49 Peugeot 206 crewed by Mike Askew and James Baggott is seen above under steering off track limits coming up Graham Hill Bend on it’s way to a 53rd place finish.

Nissan Micra, Matt / Suze Endean, MGJ Engineering Winter Stages Rally, Brands Hatch

I first came across Muriel the 1994 Nissan Micra at last years Autosport International and then again at the Hullavington Sprint, here she is again with Matt and Suze Endean aboard on her way to a 40th place finish, 2nd in Class A.

Subaru Impreza Wagon, Gary / Tom Bollands, MGJ Engineering Winter Stages Rally, Brands Hatch

Regular readers will know that I am a huge wagon fan (is anything that cannot accommodate a lawn mower in the back really a car ?) so I always back anybody driving a Subaru Impreza Wagon like the example driven, off track limits between the end of a stage and time control above, by Gary and Tom Bollands on their way to 44th place overall.

Ferrari 308 Michelotto Gr.4, Neil McMahon, Dave Mellett, MGJ Engineering Winter Stages Rally, Brands Hatch

There were two Ferrari’s on the rally, organised by Chelmsford Motor Club, above the example driven by Neil McMahon and Dave Mellett is seen opposite locking it’s way to a 55th place finish.

MGJ Engineering Winter Stages Rally, Brands Hatch

Despite the cars being started at 30 second intervals things got a bit hectic among the lower order runners, above the #69 Peugeot of 50th place finishers Trevor and Louise Gilks made a mess of the first corner of the Rally School section of a stage in front of the #73 Subaru Impreza crewed by Chris Surman and Adam Quinn which finished 48th and the second Ferrari 308 GTB crewed by Kevin and Lee Jones which was disqualified for transgressing Regulation 24.4.5 which is not known to me at this time.

Ford Escort Mk2, James Sharrock, Stuart Faulds, MGJ Engineering Winter Stages Rally, Brands Hatch

James Sharrock and Stuart Faulds piloted their #6 Ford Escort Mk2 to a fine 3rd overall behind the 2nd placed Darrian T90 GTR driven by Ashley Field and Ryan Vickers.

Peugeot 306 Maxi, Chris West, Steve McNulty, MGJ Engineering Winter Stages Rally, Brands Hatch

The winning #3 Peugeot 306 Maxi is seen above heading through the paddock crewed by Chris West and Steve McNulty.

The final rounds of the Motorsport News Circuit Rally Championship will be at Anglesey Circuit on March 20th, Cadwell Park on April 10th and Snetterton on a date in May to be confirmed.

Thanks for joining me on this “MGJ Engineering Winter Stages Rally” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again tomorrow when I’ll be looking at another competition Camaro, don’t forget to come back now !

Share

Look A Like – Ferrari 250 GT/E S2 #4019GT

In 1955 Ferrari built the first of four series of Long Wheel Base 250 GT Berlinetta’s the last of which was built in 1959.

Ferrari 250 GTE, Goodwood Festival of Speed,

It is believed seventy nine of these Berlinetta’s were built and all bar five of them with bodies by Scaglietti with either: no, one, three or 14 louvres in the C – pillar.

Ferrari 250 GTE, Goodwood Festival of Speed,

The remaining five became the second model, after a one off 166, to receive bodies from Ugo Zagato in Milan that featured Zagato’s signature double bubble roof line.

Ferrari 250 GTE, Goodwood Festival of Speed,

With more billionaires with an interest in Ferrari’s now than ever before and the price of a genuine 250GTZ well into eight figures, in the unlikely event one can find one, it is perhaps not surprising that several lesser Ferrari’s have been fitted with replica Zagato bodies.

Ferrari 250 GTE, Goodwood Festival of Speed,

In 1990 Zagato in Milan even fitted a double bubble body to the Long Wheel Base 250 Berlinetta #0757GT which became a 250 GTZ, with the correct chassis, engine and running gear.

Ferrari 250 GTE, Goodwood Festival of Speed,

The look a like Double Bubble body on the 1962 250 GT/E #4019GT, belonging to James Cottingham of DK Engineering, seen in these photographs at Goodwood Festival of Speed is uncredited.

James notes his car does not have the correct running gear and it appears to be devoid of the chrome louvre trim on the bonnet seen on the genuine 250 GTZ’s.

Thanks for joining me on this “Look A Like” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again tomorrow when I’ll be looking at the first in a series of Super Saloons. Don’t forget to come back now !

Share

Non Championship Contender – Surtees Cosworth TS16 #TS16-04

1974 looked promising for the Surtees Racing Organisation despite the fact they were running on the unfavoured Firestone tyres they replaced the McLaren bound Mike Hailwood by promoting their 1973 Formula 2 driver Jochen Mass to a full time drive alongside the rapid Brazilian Carlos Pace.

Surtees TS16, Silverstone Classic, Press Day,

The team had a new car in the form of the TS16, that was lighter than the previous TS14 model on which it was based.

Surtees TS16, Simon Fish, Silverstone Classic, Press Day,

Shortly after the start of the season at the South African Grand Prix they announced Hi Fidelity manufactures Bang & Olufsen as primary sponsor alongside toy manufacturer Matchbox and the Fina fuel brand.

Surtees TS16, Silverstone Classic, Press Day,

However despite the good omens of a championship high 4th place finish for Carlos in the Brazilian GP and season high 2nd place finish for Jochen in the non championship International Trophy at Silverstone the season turned into a disaster.

Surtees TS16, Simon Fish, Silverstone Classic, Press Day,

The main reason for this was that no monies were forth coming from primary sponsor Bang & Olufsen and after the Swedish Grand Prix Carlos Pace left to eventually join Carlos Reuteman at Brabham while Jochen left after the German Grand Prix and eventually replaced the injured Mike Hailwood at McLaren.

Surtees TS16, Simon Fish, Silverstone Classic, Press Day,

A third privately entered TS16 run by AAW racing for Leo Kinnunen failed to qualify on all but one of 6 attempts and retired when it did qualify, and drivers Derek Bell, José Dolhem, Jean-Pierre Jabouille, Dieter Quester and Helmut Koinigg brought into replace Jochen and Carlos managed a best 9th, Quester in Austria, place finish between them. At the season final US Grand Prix the luckless Helmut was then killed in an accident.

Surtees TS16, Simon Fish, Silverstone Classic, Press Day,

Jochen Mass drove today’s featured chassis six times in 1974 retiring from five of the races and failing to qualify at Monaco, Derek Bell failed to qualify the car on his final championship Grand Prix appearance at the 1974 Canadian Grand Prix while José Dolhem qualified the car, on his third Grand Prix attempt, for the 1974 US Grand Prix from which he withdrew after team mate Helmut Koinigg’s fatal accident.

Surtees TS16, Silverstone Classic, Press Day,

For 1975 Surtess regrouped by running a single TS16 for John Watson with Goodyear providing the tyres after Firestone’s withdrawal and a bare minimum of sponsorship from Matchbox who ironically were by now selling 1/32nd scale plastic kits of the 1974 Bang & Olufsen TS16.

Surtees TS16, Silverstone Classic, Press Day,

The teams luck continued in the non championship races with today’s featured chassis #TS16-04 being driven to a 2nd place finish in the Race of Champions at Brands Hatch, a 4th place finish in the International Trophy at Silverstone and TS16-05 being driven to a fifth place finish in the non championship 1975 Swiss Grand Prix run at Dijon in France.

Surtees TS16, Simon Fish, Silverstone Classic, Press Day,

In the championship events however the teams best result came when John drove TS16-04 to an 8th place finish at the 1975 Spanish Grand Prix which proved to be this cars final Grand Prix appearance.

John Watson left the Surtees team to replace the fatally injured Mark Donohue at Penske for the Canadian Grand Prix by which time Surtees had temporarily withdrawn from the championship in order to regroup again with a far more competitive prophylactic sponsored car for 1976.

TS16-04 is seen in these photographs being driven by Simon Fish at a Silverstone Classic Press Day several years ago, if you have the correct grade licence the car can be hired for Masters and GP Classic racing from Mirage Engineering see this link.

Thanks for joining me for this “Non Championship Contender” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again tomorrow when I’ll be returning to Maserati Monday’s. Don’t forget to come back now !

Share

Maserati Monday – Maserati 250F 2507/23/22

I thought it would be fun to give the pick ups, commercial and agricultural vehicles that have been a feature of Monday’s posts and restyle the day Maserati Monday, bookend the working week with two Italian marques can’t be bad, can it ?

Of the seven World Drivers Championship era’s perhaps the most romanticised is the 3rd from 1954 to 1960 when the rules mandated 2.5 litre / 152.5 cui motors to replace the 2 litre / 122 cui Formula 2 motors that had been used to determine the 1952 and 1953 World Drivers Championships.

Maserati 250F, Test Day, Mallory Park

If one car epitomises the era more than other then it is the Maserati 205F versions which took part in the very first and very last championship race of the era winning the first the 1954 Argentinian Grand Prix in the hands of Juan Manuel Fangio and being long since surpassed by the rear engined cars from Cooper and Lotus when Robert Drake soldiered away to a 13th place finish in his Joe Lubin entered 250F, 7 laps down on the winning Lotus Climax driven by Stirling Moss in the last race of the 2.5 litre era the 1960 US Grand Prix.

Maserati 250F, Test Day, Mallory Park

Apart from the 8 World Championship Grand Prix won by 250F variants, bettered only by Mercedes Benz with nine victories, while the 250F clocked up an unequaled 23 non championship Formula One race victories in the same era.

Maserati 250F, Test Day, Mallory Park

Most of the twenty six 250F’s built led hard racing lives and consequently have complicated histories today’s featured car #2507 is no exception having originally been bought by Gilbey Engineering for Roy Salvadori to drive in 1954. Roy one a non championship race at Snetterton with the car and scored many other podium placings before he crashed at Oulton Park which led to the car being returned to the Maserati factory for repairs.

Maserati 250F, Albuquerque, Test Day, Mallory Park

Maserati replaced the chassis of 2507 and sent it back to Gilbey Engineering an now it get’s complicated, the Gilbey car was eventually retired after Ivor Beub had raced it, but the damaged Gilbey chassis was repaired and given a new identity #2523 for the 1956 season in which Bristol’s Horace Gould drove the car in the Belgian Grand Prix and Piero Taruffi in the French, on each occasion it retired.

Maserati 250F, Test Day, Mallory Park

In 1957 #2523 was rebodied and given a the identity #2522 and from then until 1959 it was driven by a dozen different drivers, including Taruffi, Gould, Harry Schell, Masten Gregory, Ivor Bueb, Hans Herrmann, Joakim Bonnier, Wolfgang Seidel, Carroll Shelby, Cliff Allison, Hernando da Silva Ramos and Fritz d’Orey of which Harry Schell scored the best result a second place in the non championship 1957 Grand Prix de Pau.

By 1960 #2507/23/22 had been shipped to Brazil Gino Munaron raced it at least once before selling it on, eventually the car was fitted with a Chevrolet V8 before being brought back to Europe by Colin Crabbe in 1972. The current owner, Jose Albuquerque seen enjoying the car at a Mallory Park test day a couple of years ago, acquired #2507/23/22 in 1999.

My thanks to David McKinney, Michael ‘Tuboscocca’ Catsch, John Winfield, Allan Luton and Alan Cox at the Nostalgia Forum for their patience and understanding answering my questions and not least to Tim Murray who kindly lent me a copy of David McKinney’s excellent book ‘Maserati 250F‘ which is as good as it get’s in print on the subject of these wonderful cars. New evidence is always being shed on the stories of these cars so if you know different to what is written above, please do not hesitate to chime in below.

Thanks for joining me on this “Maserati Monday” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again tomorrow when I’ll be starting the first in a series of Bugatti blogs. Don’t forget to come back now !

Share

Pick Up With Pedigree – Reef Engineering Cub

Some times I just cannot believe some of the stories behind some of the cars I feature, today’s nifty li’l Cub designed by Yorkshireman extraordinaire John Crosthwaite, is a case in point.

Reef Engineering Cub, Rare Breeds, Haynes IMM

John’s CV included working at Lotus to refine and develop the Lotus XI and 14 Elite models, then spending some time in the States and designing the stock block Thompson Buick Indy 500 challenger Harvey Aluminium Special with which Dan Gurney made his Indy 500 debut.

Reef Engineering Cub, Rare Breeds, Haynes IMM

Following spells at BRM and developing the chassis for the Intermeccanica Italia sports cars John found himself at Reliant where his design legacy included the chassis for the Reliant Scimitar GTE and Reliant Kitten economy car.

Reef Engineering Cub, Rare Breeds, Haynes IMM

Like the Reliant Fox pick up I looked at back in November the Reef Cub is built around a Reliant Kitten chassis.

Reef Engineering Cub, Rare Breeds, Haynes IMM

John’s interest in watersports, including diving, water skiing and wind surfing led him to manufacture the Cub for holiday resorts in the Seychelles and West Indies, though the Cub, with bodywork design accredited to Peter Bailey, appears never to have gone into production.

Reef Engineering Cub, Rare Breeds, Haynes IMM

The car featured is thought to be one, the only one registered in the UK, of four prototypes all of which are / were allegedly different. This car was owned by John Crosthwaite’s daughter for ten years.

Thanks for joining me on this ‘Pick Up Pedigree’ edition of ‘Gettin’ a li’l psycho on tyres’, I hope you will join me again tomorrow. Don’t forget to come back now !

Share

Pole Sister – Nissan R90CK

Like the Lancia LC2 seen in Monday’s post the Nissan R90CK seen here at Colin Bennett’s CGA Engineering Workshop is scheduled to appear at the Silverstone Classic for the Group C race next weekend.

Nissan R90CK, CGA Engineering

Three serious works teams gathered to contend the 24 hours of Le Mans in 1990, Jaguar with three cars were the eventual winners, Toyota with three cars did not really figure, but Nissan with 5 front line R90CK cars became the first Japanese manufacturer to sit on pole position at this endurance classic.

Nissan R90CK, CGA Engineering

The Nissan R90CK’s were built around Lola T90/10 chassis

Nissan R90CK, CGA Engineering

and prepared for the World Endurance Championship by Nissan Motorsports Europe.

Nissan R90CK, CGA Engineering

This particular vehicle has a rear facing camera connected to the screen seen here to aid reversing. Mark Blundell’s pole winning 3m 27s Le Mans qualifying lap immortalised with cockpit cam can be seen on this mind boggling youtube clip.

Nissan R90CK, CGA Engineering

It is said that Mark had over 1000 hp available during his qualification lap from his 3.5 litre / 213 cui Nissan VRH35 V8 motor,

Nissan R90CK, CGA Engineering

thanks to a ceased turbo waste gate.

Nissan R90CK, CGA Engineering

Mark recorded a top speed of 226.9 mph on the Mulsanne Straight speed strap between the two newly installed chicanes a record that apparently still stands.

Nissan R90CK, CGA Engineering

Six months after the unlikely Mazda victory at Le Mans in 1991, a NISMO version of the Lola T90/10 the Nissan R91CP won the 1992 Daytona 24 hour race in the hands of Masahiro Hasemi, Kazuyoshi Hoshino and Toshio Suzuki.

Nissan R90CK, CGA Engineering

At the end of the 1990 season Nissan withdrew from the World Prototype Sportscar Championship but continued to develop the RC90CK cars for the All Japan Sports Prototype Championship which the manufacturer won in 1990,’91 and ’92.

Nissan R90CK, CGA Engineering

This particular car is now owned by Katsu Kubota.

Nissan R90CK, CGA Engineering

While there is still a good supply of parts for these vehicles

Nissan R90CK, CGA Engineering

the cost of running one is expensive.

Nissan R90CK, CGA Engineering

In 1990 the car driven by Kenny Acheson, Olivier Grouillard and Martin Donnelly

Nissan R90CK, CGA Engineering

qualified in 5th place at Le Mans but was eliminated on the opening lap with a gearbox problem.

Nissan R90CK, CGA Engineering

I shall look forward to seeing this car in action, 21 years after I first saw one, at the Silverstone Classic next weekend.

That concludes a series of three Group C blogs, my thanks to Colin Bennett for his hospitality and Tony Gallagher for organising the trip to Colin’s workshop.

Hope you have enjoyed today’s ceased wastegate edition of ‘Gettin’ a lil’ psycho on tyres’ and that you will join me again tomorrow. Don’t forget to come back now !

Share

Tribute to Ronnie – March 71B – 08

Resting in the entrance to Colin Bennett’s CGA Engineering in Warrington a couple of Saturdays ago was this March 71B belonging to Katsu Kubota a ‘gentleman driver’ who admires one of my heroes Ronnie Peterson.

March 71B, CGA Engineering

The car is painted in the colours used by Ronnie Peterson when he drove a similar car in 1971 to win the European Formula 2 Championship, a second tier open wheel series for cars powered by engines up to 1600 cc / 109.9 cui.

March 71B, CGA Engineering

Ronnie from Almby in the vicinity of Örebro, Sweden, secured the championship with four wins at Rouen, Mantrop Park, Flugplatz Tulln-Langenlebarn, Vallelunga and took five pole positions. Ronnie also secured second place in the World Drivers Championship in 1971.

March 71B, CGA Engineering

The ambitious March team took it’s name from founders Max Mosley, Alan Rees, Graham Coaker and Robin Herd, in 1969 they built a Formula 3 third tier open wheeler and the following year decided to take the racing world by storm by manufacturing vehicles to compete in Formula 1, Formula 2, Formula 3, Formula Ford and Can-Am for customers to race, while also running factory teams in the Formula 1, Formula 2 and Formula 3 open wheel series. Jochen Rindt originally agreed to race the works Formula 1 car but backed out when he realised the scale of the March undertaking outside Formula 1.

March 71B, CGA Engineering

This 71B was originally built to take part in Formula Atlantic races in 1971, Formula Atlantic also known as Formula B in the USA was a halfway house between Formula 3 and Formula 2 powered by 1600 cc / 109.9 cui motors that were not in such a high state of tune as either Formula 3 or Formula 2 and therefore much cheaper to run. The 71B chassis has many components that are interchangeable with the March 713 and 712 chassis built for Formula 3 and Formula 2 respectively.

March 71B, CGA Engineering

At present I know nothing about the history of chassis 71B – 08 prior to Mr Kubota’s ownership if you did please chime in below or send me an e-mail, my e-mail address can be found in my ‘Blogger’ profile.

March 71B, CGA Engineering

I understand wooden gear stick knobs are popular in the racing community because they save weight, the Porsche 917 famously used a gear stick knob made of balsa wood.

March 71B, CGA Engineering

The motor fitted to Mr Kubota’s March is an out of period 1,975 cubic centimetres /120.5 cui Ford Cosworth BDG 4 cylinder unit with an aluminium cylinder block of a type that was sanctioned in Formula 2 from 1972.

March 71B, CGA Engineering

Last year Mr Kubota became the first driver from Japan to win an FIA sanctioned Formula One race in the Historic Formula One series, this year he will also race the genuine March 761/06 as raced by Ronnie Peterson to victory in the 1976 Italian GP, a car that will appear in a future blog once I have seen it run later in the summer.

My thanks to Colin Bennett for having me and several members of The Nostalgia Forum visit his fascinating workshop and to Tony Gallagher for organising the trip.

Hope you have enjoyed today’s Tribute to Ronnie Peterson edition of ‘Gettin’ a lil’ psycho on tyres’ and that you will join me again tomorrow. Don’t forget to come back now !

Share