Tag Archives: Cowley

Advancing Suspension – Petty Norton

Acknowledged Norton tuning expert Ray Petty, no known relationship to the Petty’s of Level Cross, NC, turned his attention to building a 500 Formula 3 car in late 1955.

Petty Norton, Oulton Park

The Petty Norton featured a space frame chassis and suspension with rocker arm actuated inboard coil springs and shock absorbers at the front and de Dion rear with a transverse leaf spring.

Petty Norton, Oulton Park

Powered by one of Ray’s tuned 497 cc / 30.3 cui Norton Motors Alan Cowley led on the cars debut at the Boxing Day Brands Hatch meeting, until he spun into retirement.

Petty Norton, Castle Combe

Alan continued driving the Petty Norton through 1956, with Ray Petty taking over for the Brighton Speed Trials and Freddie Campbell for the Commander Yorke 100 mile race at Silverstone in September 1956.

Petty Norton, Nigel Challis, 500 F3, Oulton Park

The Petty Norton is not known to have competed in 1957, though why remains a mystery since when Jeremy Menzies took over the wheel in 1958 he recorded at least three “Junior” wins at Brands Hatch and a respectable 4th in the Commander Yorke 100 run in August 1958.

Petty Norton, Nigel Challis, BAC MSA Challenge, Castle Combe

Dave Lecoq driving the unique Petty Nroton won the Earl of March Trophy at Goodwood in 2005.

Petty Norton, Nigel Challis, BAC MSA Challenge, Castle Combe

Seen at the wheel at Oulton Park in 2013 and Castle Combe two weeks ago is present owner Nigel Challis.

Thanks for joining me on this “Advanced Suspension” edition of “Gettin’ a li’l pscho on tyres” I hope you will join me again tomorrow when I’ll be looking at a 1936 ERA. Don’t forget to come back now !

Share

Nice Door Handles – Morris Marina ADO 28

With the merger of Jaguar with British Motor Corporation in 1966 the new merger was renamed British Motor Holdings and after a further merger with Leyland commercial vehicles the corporation became known as British Leyland Motor Corporation in 1968. British Leyland as it was known decided that the Austin and Morris brands should be differentiated in the early 1970’s with Austin vehicles being based around the front wheel drive (FWD) concept pioneered by Ales Issignosis with models like the Mini, 1100 and 1800 series vehicles while Morris vehicles would be more traditional with front engines driving rear axles (RWD) as they had on the Morris Minor and Morris Oxford models.

Morris Marina, Bristol Classic Car Show, Shepton Mallet

The design of the Marina coded ADO 28 was started by Roy Haynes who’s CV included the design of the popular Mk II Ford Cortina, however a disagreement over a common floor pan to share between models as espoused by Roy led to him quitting and Triumph Designer Harry Webster finishing the job by which time the intended Macpherson strut front suspension had been abandoned in favour of Morris Minor style tortion bars and a new gearbox design was abandoned in favour of an existing item from the Triumph parts bin.

Morris Marina, Atwell Wilson Museum, Calne

All in all the development costs of the conservative RWD concept Marina ended up exceeding those of the more radical FWD Allegro which was developed to be Austin’s competitor in the small family car market. Production facilities at Cowley had to be upgraded which included some comedy as an overpass was built so that the motors could be sent from a plant on the opposite side of a municipal road to the assembly plant, no sooner had the overpass been completed than the municipality offered to sell the road which British Leyland did not think twice to accept.

Morris Marina, Qwara, Malta

On a positive note the AMC Ambassador inspired vertical hinged door handles were a huge hit with Lotus founder Colin Chapman who specified them for use on the Lotus Elite, Eclat and Esprit models, Marina door handles were also adopted by Scimitar for the GTE shooting break while British Leyland used the same handles on the Triumph TR7/TR8, Austin Allegro and they eventually even found their way, finished in matt black, onto the Land Rover Discovery Series I.

Morris Marina, Cotswolds Classic Car Club, Frogsmill, Andoversford

Marina cars were powered by a variety of motors most common of which for the UK market was a 57 hp 4 cylinder A series which did not do much for performance but kept the handling within safer limits than the heavier more powerful motors which promoted lane changing understeer / push which induced the odd brown trousers moment for some Marina pilots.

Morris Marina, Cotswolds Classic Car Club, Frogsmill, Andoversford

The Marinas seen here are in order top to bottom a ’72 Coupé at the Bristol Classic Car Show, Shepton Mallet, ’74 Twin Carburettor saloon sedan at the Atwell Wilson Museum, a Maltese 1500 saloon / sedan with after market alloy wheels and waist trim in Qwara, a ’79 Estate and ’72 Coupé both at the Cotswolds Classic Car Club meeting held at Frogsmill, Andoversford and below a saloon / sedan with an unusually straight rear bumper seen at last years Classics at the Castle, Sherborne.

Morris Marina, Classics at the Castle, Sherborne

Although much derided for almost every detail apart from the door handles the undemanding early 70’s British public lapped up Marina’s painted in tepid colours like Russet Brown, Harvest Gold, and Limeflower Green for the car to peak at second in the sales charts behind the Ford Cortina in 1973 and remain in the top 3 or 4 until 1980. Eventually over 897,000 Marina’s were sold in the UK of which 745 are thought to remain on British roads.

Thanks for joining me on this “Nice Door Handles” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again tomorrow. Don’t forget to come back now !

Share

Convivial Motoring – Rolls Royce Phantom Drophead Coupé

With styling inherited from the 2006 9 litre / 549 cui V16 100EX concept car the Rolls Royce Phantom Drophead Coupé was launched in 2007 at the North American International Auto Show held in Detroit.

Rolls Royce, Phantom Drophead Coupé, Pistonheads, BMW Factory, Cowley

Regrettably the V16 was not part of the production spec of the Phantom Drophead Coupé a ‘puny’ 6.75 litre / 412 cui V12 first seen on the 2003 Rolls Royce Phantom saloon / sedan.

Rolls Royce, Phantom Drophead Coupé, Pistonheads, BMW Factory, Cowley

With twin turbochargers the V12 produces an effortless 453 hp enough to give the 2,620 kg / 5800 lbs vehicle sports car performance on acceleration and top speed, the sligthly lighter saloon / sedan can be pushed from rest to 186 mph in 60 seconds.

Rolls Royce, Phantom Drophead Coupé, Pistonheads, BMW Factory, Cowley

Thanks to electronic sensors the Spirit of Ecstasy ornament retracts in an emergency and can be set to retract whenever the doors are locked or when ever the owner chooses by a control in the glove box.

Rolls Royce, Phantom Drophead Coupé, Pistonheads, BMW Factory, Cowley

Naples Children and Education Foundation became the beneficiaries to the tune of US $1.6 million when the first Rolls Royce Phantom Drophead Coupé destined for the USA was sold at auction for $ 2m. It is believed this is the highest price ever paid for a new car at the time.

Rolls Royce, Phantom Drophead Coupé, Pistonheads, BMW Factory, Cowley

The ‘techno modern’ combination of LED lights and “faux-foglamp” projector-style xenon arc lamps, which in my humble opinion are something of an acquired taste, have been replaced with a less jarring design on the latest 2012 models.

Rolls Royce, Phantom Drophead Coupé, Pistonheads, BMW Factory, Cowley

Very much a hand built car, though painted in one of 44,000 colour options by robot, the body of this 2010 Drophead Coupé is crafted from aluminium.

Rolls Royce, Phantom Drophead Coupé, Pistonheads, BMW Factory, Cowley

The rear hinged coach doors are designed to “allow elegant entry and exit to and from the rear lounge seat”.

Rolls Royce, Phantom Drophead Coupé, Pistonheads, BMW Factory, Cowley

A convivial atmosphere is maintained within the Drophead Coupé by translating an avant garde reinterpretation of an English Gentleman’s clubroom into the cockpit.

Rolls Royce, Phantom Drophead Coupé, Pistonheads, BMW Factory, Cowley

Allegedly sitting in a Phantom Drophead Coupé is evocative of sitting aboard a 1930’s J Class, America’s Cup, yacht,

Rolls Royce, Phantom Drophead Coupé, Pistonheads, BMW Factory, Cowley

aided in no small measure by the decking which acts as a cover for the Drophead which is made from 5 layers of material including cashmere.

Rolls Royce, Phantom Drophead Coupé, Pistonheads, BMW Factory, Cowley

Despite a list price of over US $400,000 253 Drophead Coupés found a new home worldwide in 2007.

Thanks for joining me on this “Convivial Motoring” edition of “Gettin’ a li’l psycho on tyres”, I hope you will join me again tomorrow. Don’t forget to come back now !

Share

Measured & Realistic – Rolls Royce Ghost V12

The 2.5 tonne steel bodied Rolls Royce Ghost V12 is a smaller 150lbs lighter “more realistic, more measured” car that the aluminium bodied range topping Rolls Royce Phantom.

Rolls Royce Ghost V12, Piston Heads, BMW Group Plant, Cowley

At it’s heart lies a 6.6 litre / 402 cui twin turbo charged V12 BMW N74 motor that produces 540hp and 500 lbs/ft torque, which is transmitted through an 8 speed automatic gearbox, sufficient to propel the Ghost V12 from rest to 60 mph in 4.7 seconds with top speed is limited to 155 mph.

Rolls Royce Ghost V12, Piston Heads, BMW Group Plant, Cowley

Designed by Andreas Thurner and engineered by Helmut Riedl the Ghost V12 sits on a modified 7 Series platform.

Rolls Royce Ghost V12, Piston Heads, BMW Group Plant, Cowley

20% of the Ghost V12’s parts are said to be common to the BMW 7 Series,

Rolls Royce Ghost V12, Piston Heads, BMW Group Plant, Cowley

including the iDrive user interface which is used to control climate, radio/CD, navigation and communication systems.

Rolls Royce Ghost V12, Piston Heads, BMW Group Plant, Cowley

The Ghost V12 is fitted with an active four corner air suspension with Active Roll Stabilisation and Variable Damping Control operating the air springs.

Rolls Royce Ghost V12, Piston Heads, BMW Group Plant, Cowley

Since its’s launch in 2009 a number of special editions have been built still today available are the Mansory White with led daytime running lights, Extended Wheel Base, China Edition with red interior gold coach lines and gold mascot, Two Tone and Art Deco which features an illuminated mascot.

Thanks for joining me on this “Measured & Realistic” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again tomorrow. Don’t forget to come back now !

Share

Mini Rust Beater – Domino HT

Today’s blog comes from the BMW Plant near Cowley where the current range of retro Mini’s are made and where I saw this splendid little Domino HT at the recent PistonHeads Sunday Service.

The Domino’s in 4 styles were Glass Reinforced Plastic (GRP) kit cars designed around Mini running gear and manufactured by Fibretech GRP Ltd which was taken over by Domino Composite itself renamed Composite Designs from at least 1978 to 2007 when liquidation forced the cessation of production. It would appear an wholly autonomous group DominoCars – Organisation is attempting to keep the Domino brand alive.

The HT (hard top) model seen here was the follow on from the original T top Pimlico model and is loosely based around a standard Mini though it is bereft of the standard Mini seams and gutters. It is also significantly different below the waist line with built in flared wheel arches and a flared body around the top of the road wheel line. The doors are 2/ 1/2 inches shorter than Mini doors to accommodate the higher sills needed to aid the structural integrity of the GRP body.

If your original style Mini is falling to bits with dreaded tin worm you could do worse than find a smart Domino GRP body, take of all bits of your Mini and transfer them straight on to the GRP shell including subframes, interior, windows, up to 13″ wheels and off you go in your new car with parts recycled from your old one.

Hope you have enjoyed to days Glass Reinforced Plastic edition of ‘Gettin a lil’ psycho on tyres’ and that you’ll join me again tomorrow. Don’t forget to come back now !

Share

Fit for a Sheikh – Bristol 405 Drophead

The Bristol 405 introduced in 1953 was the first Bristol to dispense with the BMW inspired grill and is unusual for having a single fog light placed in the middle.

There were two versions of the 405 this Drophead of which 43 were built and an imposing 4 door saloon of which 308 were built until production ended in 1958.

A 1971 cc / 120 cui straight six motor was exclusively tuned to produce 125 hp for the Drophead, the Saloon was given a 105 hp version of this engine. One blogger described the sound of this motor as being like ‘a squadron of Lancasters‘.

The first two 405 D’s were strictly two seaters with fully retracting roofs, however all bar one of the remaining Dropheads had roofs that rested on the rear body work making space for rear seats. A one off 405 D was produced for Sheikh Yusuf Mohammed Al Tawil and shipped to Jeddah in 1955 painted gold with silver wheels, white wall tyres and an electro-hydraulic operated roof.

The slick action four speed gearbox of all 405’s were fitted with a Laycock overdrive for high speed cruising operated by the large toggle switch to the right of the steering wheel.

The first 18 to 20 Bristol 405 Drophead chassis were sent to Abbots of Farnham where the bodywork was crafted. Abbots landed a large contract to build estate / station wagon version of the Ford Zephyr and Zodiac models and the remaining 405 D’s were sent to Tickford, in Newport Pagnell, for body work to be built according to the Abbots of Farnham drawings. I am not sufficiently drenched in Bristol Cars lore to tell you where this particular body was crafted… yet.

I suspect I could get used to fresh air motoring in a vehicle fit for a Sheik that sounds like a ‘squadron of Lancasters‘ how about you ?

Thanks to the owner of this fabulous vehicle for bringing it to the Sunday Service at the BMW Plant a couple of weeks ago.

Hope you have enjoyed today’s fit for a Sheikh edition of ‘Gettin’ a lil’ psycho on tyres and that you will join me again tomorrow for a Swedish tease. Don’t forget to come back now !

Share

California Dreaming – Ferrari California 2+2 Convertible

A couple of years ago I was at an airport and I noticed in the duty free area there was a Ferrari on a turntable that was a raffle prize.

I’d never seen one like it before turns out that it was a California, at £25 / $40 a pop for a ticket I passed on what may well have been my only opportunity to own a Ferrari without regret.

Allegedly the California was originally conceived as Maserati, however the economics of the project dictated that only a Ferrari badge offered any hope of a financial return on the vehicle.

Researching this blog I was surprised to find the California introduced in 2008, shares it’s engine design with both ALFA Romeo and Maserati models.

Over 1,000 hours are said to have been spent in a wind tunnel perfecting the aerodynamics of the California so that it’s drag coefficient is 0.32 the lowest ever achieved for any Ferrari.

I have to confess it was not until I had run a registration check on these vehicles that I had any idea of exactly which models they were and indeed they were both the same type, I thought the red one was a 612 Scaglietti !

Allegedly there is room on the back seats for two adults in a Ferrari 612 Scaglietti something at 6′ 2″ I’d love to put to the test.

Even if I had known it comes with a front mounted 450 hp 4.3 litre 260 cui V8 engine I doubt I would have been tempted to buy a raffle ticket….

because for all the attention to detail …

beautiful craftsmanship ….

seven speed dual clutch transmission …

and promise of the joys of open air motoring …

alone price of the road tax on the Ferrari California is enough to keep me on the road for a whole year in my 20 year old jalopy … but that does not stop me from dreaming 🙂

With thanks to the PistonHeads responsible for bringing these dream machines to the Sunday Service at the BMW Plant in Cowley a couple of weeks ago.

Hope you have enjoyed to days California dreaming edition of ‘Gettin a lil’ psycho on tyres’ and that you’ll join me again tomorrow for a look at another vehicle bearing the California name. Don’t forget to come back now !

PS Should I have failed to quench your thirst for Ferrari’s take a look at the new Ferrari FF with Michele Rahal over on The Drive Channel.

Share