Tag Archives: Can Am

The Sucker Car – Chaparral Chevrolet 2J #2J001

The Chaparral 2J powered by a conventional 680hp aluminium block V8 with an unconventional, but race proven automatic transmission is one of the most fabled in all of motor racing, despite the fact that from just four starts it recorded just one sixth place finish at Road America with Vic Elford at the wheel in September 1970.

Chaparral Chevrolet 2J, Goodwood Festival Of Speed

The reason the Chaparral 2J, even today, draws so much attention is that it’s only point of reference is a hover craft, unlike a hover craft, which floats on a cushion of air, the 2J’s aerodynamics are configured to suck it to the ground. All though I do not believe it was ever put to the test, it is said that the 2000lb 2J, when stationary can generate enough down force that it could, in theory, stick it’s self to the ceiling.

Chaparral Chevrolet 2J, Goodwood Festival Of Speed

The first person to race the 2J in 1970 was none other than 1969 World Champion Jackie Stewart who qualified 3rd for the Watkins Glen Can Am race, but retired with brake failure. The team skipped the next couple of races and then turned up at Road America where Vic Elford qualified on pole and scored the cars only finish 6th place.

Chaparral Chevrolet 2J, Goodwood Festival Of Speed

Missing a couple of more races Vic then qualified on pole at Laguna Seca where the engine broke during the warm up causing a non start. Then at Riverside Vic qualified on pole again but the key to the cars aerodynamics the 55hp two cylinder two stroke Rockwell motor broke so that the pair of fans it drove, which sucked the air out from beneath the car to improve the road handling, were no longer operative causing Vic to retire from the race.

Chaparral Chevrolet 2J, Goodwood Festival Of Speed

The Chaparrals clever aerodynamics were a full six to eight years ahead of anything seen in Formula One, often considered the very apex of the engineering envelope. Unfortunately the 2J’s days were numbered thanks to a number of high profile wing failures in Formula One which had led the governing body of the sport, the FIA in Paris, banning all ‘movable aerodynamic’ devices.

It was clear despite Jim Hall’s Chaparral partner Hap Sharp insisting “If I can come up with a better mousetrap that is within the regulations, I ought to be allowed to use it”, that the fans on the back of the car were aerodynamic devices which permanently sucked the car to the ground, so long as the Rockwell motor was working, and so the concept behind the 2J was duly outlawed at the end of 1970 with it’s full potential completely unrealised.

Thanks for joining me on this “The Sucker Car” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again for Ferrari Friday tomorrow. Don’t forget to come back now !

Share

Traffic Yellow Customer Racer – McLaren Chevrolet M8 C

The 1969 season saw the Canadian American Challenge expand to an eleven race series, the most run in any year of the challenge, but only the McLaren Cars Team cars with New Zealanders Bruce McLaren and Denny Hulme recorded wins. Bruce won six of the races driving his McLaren M8B and with Denny recording the remaining five.

McLaren M8C/D, Race Retro

For 1970 McLaren Cars updated the M8B to a design known as the M8D while offering a production version of the M8B built by Trojan known as the M8C, of the type featured today. Confusingly Trojan also built 15 McLaren M12’s featuring updated M6 chassis running with M8 size wheels and adapted M8 bodywork in 1969. The most successful exponent of the customer M8C in the 1970 Can Am Challenge was Canadian Roger McCaig who recorded 3 5th place finishes and an eventual 10th place in the 1970 Challenge standings.

Lothar Motschenbacher who drove one of the 1969 Mclaren M8B’s, a 1969 McLaren M12 and an M8C during the 1970 Can Am Challenge recorded one 5th place in his M8C at the last race of the season to finish a distant 2nd in the 1970 Can Am Challenge, to Denny Hulme who won 6 of the ten 1970 Can Am races in his M8D to secure his second Can Am Championship.

McLaren M8C/D, Race Retro

According to the Bruce McLaren Trust website Trojan built 15 M8C’s which were also raced in Europe and South American series. The Ford Cosworth DFV powered M8C driven by Chris Craft won the 1970 Swedish Grand Prix run for sports cars including a couple of Porsche 917K’s.

The most successful McLaren M8C appears to have been chassis #70-08 which was driven to three victories in Argentina by; Nasif Estéfano at Buenos Aeries in April 1971, Carlos Pairetti at Buenos Aeries in August 1971 and Osvaldo López at San Martin in March 1973. The car was listed on each occasion as being powered by a Ford motor.

McLaren M8C/D, Race Retro

The only other in period victory recorded for an M8C is the Chevrolet example driven by Siegfried Rieger at Hockenheim in November 1971, his car featured an M12 chassis with M8C bodywork.

The last ‘in period’ race recorded for any M8C, thought to be for today’s featured car M8C #30-25, was driven by Richard Dotkins at an Interserie event run at Zolder in August 1992, where the car finished 6th in Heat 2. Since then #30-25, which would never have run in the works McLaren Traffic Yellow colour scheme as seen here, is thought to have recorded at least 5 race victories in sundry (primarily classic/historic) events through the 1990’s; 2 by Richard Dotkins, 2 by Richard Eyre and 1 by Geoff Farmer.

McLaren M8C/D, Race Retro

The #30 series chassis number of the car would more normally be associated with a space/tube frame Trojan built McLaren M1B. The history of McLaren M1B #30-25 is, like the history of M8C/D #30-25 prior to 1992, also unknown at the time of writing.

The car featured to day was seen at Race Retro and is raced by Harry Reed.

My thanks to raceanouncer2003, Belmondo, David McKinney and Duncan Fox at The Nostalgia Forum for their help in identifying today’s car and it’s history.

Thanks for joining me on this “Traffic Light Yellow Customer Racer” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again tomorrow when I’ll be looking at a Can Am BRM. Don’t forget to come back now !

Share

Three Engineers From Detroit – Wolverine LD65 #LD65/1

The story of the Wolverine Chevrlolet LD65 according to one of it’s former owners, began at a race where Jerry Hansen was driving his successful McKee Chevette and was blown into the weeds by a front engined car. When Jerry approached the team in the pits after the race and asked who they were they responded “three engineers from Detroit”. One of the engineers was Lee Dykstra who would make a name for himself with the Jaguar XJR5 IMSA car and a number of Indy Cars.

When Jerry asked why the three engineers did not build a rear engined car they replied they did not have the money so Jerry wrote them a cheque and asked the three engineers from Detroit to build him one.

The Wolverine designed by Lee Dykstra and George Anderson first appeared in a national SCCA race at Greenwood which Jerry Hansen won, Jerry then recorded a did not finish at Mid-Ohio before appearing at the inaugural Can Am Challenge at St Jovite in September 1966. Jerry qualified 25th and finished 20th.

Wolverine LD65, Goodwood Revival

Jerry never raced the Wolverine again, it would appear that the week before St Jovite Jerry was due to share a McLaren Elva Mk II with Charlie Hays in the Road America 500. However, after his friend and fellow Minneapolis/St Paul, Minn., resident Don Skogmo was killed driving a Lola T70 Mk II, in an accident during practice for the same race, Jerry withdrew from the event handing his ride in the Hayes McLaren to Earl Jones.

It is thought Jerry raced the Wolverine at St Jovite before sitting out the remainder of the year due to pressure from his family to retire from driving. The following year Jerry returned to racing and did not retire permanently until 1986, by which time he had clocked up a record 27 National Sports Car Club of America titles. Today the Hansen name is still connected to racing through his daughter Courtney an actress, author and presenter of motoring related television shows including Powerblock.

Jerry sold the Wolverine to Owen Rutherford who bought the car for Frank Opalka. In 1968 Frank recorded a DNF in the Road America 500 miles with Bob Lyon, and by Franks account scored many more DNF’s before the bugs were sorted out in “SCCA and USRRC” events. Frank relates how once the car was reliable he would be congratulated for finishing.

Wolverine LD65, Goodwood Revival

Frank also tells a good tale about a sponsor “Miami Serpenterium” who required that the car be painted all over with snakes. At Road America Owen turned up with a “station wagon loaded with poisonous snakes” one of which, a cobra, escaped and bit sponsor Bud Severens who required Buds hospitalisation, a story which made the local news. Apparently Bud never did work out how the cobra came to be in Wisconsin.

Jim Place became the next owner of the car and it is in the colours that Jim painted the car that it appears today. Jim is known to have been on the entry list for at least two Can Am events he is recorded as not arriving at the race at Michigan International in September 1969. Jim qualified 24th at Road America in August 1970 but did not start the race which is the last of the Wolverines appearances known to me.

The car is now raced by Morgen Christensen who is seen at the wheel above at Goodwood a couple of years ago. The red car alongside Morgens is the Rolls Royce powered Marina driven by Mark Ashworth.

My thanks to all those including Frank Opalka who commented on the Wolverine thread at The Nostalgia Forum, and especially Tom “RA Hisotrian” Schultz who revealed why Jerry Hansen’s career with the Wolverine was so short lived.

Thanks for joining me on this “Three Engineers From Detroit” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again tomorrow when I’ll be having a French sojourn. Don’t forget to come back now !

Share

The Surtees Hill Lola – Lola Chevrolet T70 Mk II Spyder SL71/43

Team Surtees started running Lola T70’s in sports car races in 1965, for 1966 the teams proprietor, 1964 World Champion, John Surtees ran a Chevrolet Mk II spyder variant, chassis #SL71/17, in the Canadian American (Can Am) Challenge winning the inaugural Can Am race at St Jovite from pole with the car.

Surtees retired from the next couple of Can Am races with a broken oil pipe and then after a start line accident at Bridgehampton and Mosport respectively. At Laguna Seca the team had a new chassis #SL71/43, today’s featured car, which he qualified 7th but retired for a third time after 92 laps with suspension damage.

Knapfield, Lola T70, Goodwood Revival

John Surtees returned to chassis #SL71/17 at Riverside where he qualified second and won, 1962 World Champion and 1966 Indy 500 Winner Graham Hill was drafted into chassis #SL71/43 and came home third from 5th on the grid in the cars final appearance for Team Surtees.

Knapfield, Lola T70, Goodwood Revival

Surtees went into the final round of the 1966 Can Am Challenge at Stardust International Raceway in Las Vegas sharing the series lead with 1961 World Champion Phil Hill who was driving a Chaparral 2E.

Despite qualifying 4th behind Jim Hall on pole with his Chaparral team mate Phil Hill beside him and Chris Amon in a McLaren Elva in third, John Surtees forced his way through to the lead on the opening lap. John did not relinquish that lead for the entire 70 lap race and so secured the inaugural Can Am Championship.

Chassis SL71/43 was acquired by George Ralph for 1968 his best results with the car were two 11th place finishes one in the USRRC Championnat Nord-Americain race held at Mont-Tremblant from 17th on the grid and the other in the Road America Can Am race from 21st on the grid.

Current owner Paul Knapfield is seen driving the car at the 2011 Goodwood revival in these photo’s.

My thanks to Tom RA Announcer Schultz for kindly visiting his den to dig out the chassis details of today’s featured car from his copy of Lola T70 – The Design, Development & Racing History Hardcover – December 1, 2012 by John Starkey and Franco Varani.

Thanks for joining me on this “The Surtees Hill Lola” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again tomorrow. Don’t for get to come back now !

Share

Ford’s Only CanAm Race Winner – Lola Ford T70 Mk II #SL71/34

For the up coming inaugural 1966 Canadian American Challenge All American Racers took delivery of a new Lola T70 Mk II chassis #SL71/34 for which was powered by a 5 litre / 305 cui Ford Westlake V8 motor. The car was driven by Dan Gurney alongside the team’s 1965 Lola T70 Mk I chassis #SL70/10 which was run for Jerry Grant.

Lola Ford T70 Mk II, Goodwood Revival

After qualifying 9th for the inaugural Can Am race at St.Jovite Dan’s challenge got off to a poor start, because he did not start due to engine problems which manifested themselves during practice.

Lola Ford T70 Mk II, Goodwood Revival

At the next round held at Bridgehampton things improved with a start from pole position which Dan translated into, what turned out to be, the only win for a Ford powered car in the entire history of Can Am. Extraordinary given Ford’s persistence in tackling and winning Indy, Le Mans and an eventual decade and a half of dominance in Formula One.

Lola Ford T70 Mk II, Goodwood Festival of Speed

Dan started the following race at Mosport from pole but retired with ignition problems, at Laguna Seca Dan started 4th but retired with a cracked engine block. Dan’s bad luck continued at Riverside where he qualified 6th but retired with a clutch issue. At the Challenge finale held at Stardust international Raceway in Las Vegas Dan qualified 9th and retired with a broken fuel tank.

Lola Ford T70 Mk II, Goodwood Festival of Speed

It is probably just as well Dan did not follow Jerry Grant’s lead by emptying the contents of a revolver into the car at the seasons end.

Thanks for joining me on this “Ford’s Only CanAm Race Winner” edition of “Gettin’ a li’l psycho on tyres”, I hope you will join me again tomorrow when I’ll be looking at a US built vehicle that took part in the 1966 Can Am Challenge. Don’t forget to come back now !

Share

Jim’s Favourite – Chaparral Chevrolet 2E

To celebrate the 40th anniversary of my introduction to the wonders of The Canadian American Challenge Cup in something approximating real time mediated through the pages of ‘Motor Sport’ magazine, for the remainder of the month I’ll be featuring a selection of Group 7 race cars; on Saturday’s, Sunday’s, Mondays and the last two Thursdays of the types used in the Can Am Championships run from 1966 to 1973 or European “Intersiere” races run from 1970.

Chaparral 2E, Goodwood Festival Of Speed

The inaugural 1966 “Can Am” Challenge race was run at St.Jovite on 11th September 1966 and won by 1965 World Drivers Champion John Surtees driving a Team Surtees Lola T 70 Spyder.

Chaparral 2E, Goodwood Festival Of Speed

Texas Oilman and innovative engineer Jim Hall and his Chaparral team made their debut in the Series at Bridgehampton the following week where Hall was to drive the #66 Chaparral 2E chassis #2E001 with 1961 World Champion Phil Hill in the identical sister #65 chassis #2E002.

Chaparral 2E, Goodwood Festival Of Speed

Come the start of the event it was Phil Hill who found himself at the seat of chassis #2E001 starting fourth, after Hill’s intended car developed chassis problems during practice and Jim handed the world champion Phil his own car.

Chaparral 2E, Goodwood Festival Of Speed

Phil finished the race in 4th place behind the Lola Ford T70 of Dan Gurney, the McLaren Elva Mark II Chevrolet driven by Chris Amon and the Mark IIb McLaren Elva Chevrolet driven by Bruce McLaren.

Chaparral 2E, Goodwood Festival Of Speed

Like most vehicles of the time the Chaparral 2E featured three pedals, unlike most, the pedals operated the accelerator and brakes while the third operated a front spoiler beneath the nose and rear wing to adjust the amount of drag created to maximise the vehicles performance around the corners and along the straights of a circuit.

Chaparral 2E, Goodwood Festival Of Speed

Two unusual features of the drive train were, first the 450 hp aluminium alloy block 5.4 litre / 327 cui Chevrolet V8 chosen in favour of the more powerful and heavier 5.9 litre iron block Chevrolet Motor used by John Surtees in the Lola, and second the Chaparrals were uniquely equipped automatic transmissions.

Chaparral 2E, Goodwood Festival Of Speed

Although similar aerodynamic devices had been attached to competition vehicles before, notably by Mercedes Benz who attached a wing to the roof of their 300 SL during practice for Le Mans in 1952 and by Fritz von Opel who attached wings to the sides of his 1928 solid rocket fueled Opel RAK 2, when activated to give down force at the expense of increased drag and decreased forward speed the Chaparral 2E’s aerofoil shaped wing transmitted down force directly through the rear suspension, while a spoiler under the nose acted similarly to increase down force on the front suspension, which together improved the handling in the corners.

Chaparral 2E, Goodwood Festival Of Speed

The Challenge returned to Canada one week later again on September 24th 1966 for the ‘6th Canadian Grand Prix for the Pepsi-Cola Trophy’ run Mosport Park. Hall qualified 9th and Hill 11th with Hill finishing second to Mark Donohue in a Penske run Lola Chevrolet T70. Jim retired at 1/3 rd distance with an engine problem.

Chaparral 2E, Goodwood Festival Of Speed

Nearly a month later on October 16th 1968 Jim Hall started the Monterey Grand Prix run at Laguna Seca from pole position in his #66 2E and alongside him on the grid was Phil Hill in the #65. After 2 hours at the wheel during which he covered 106 laps Phil Hill crossed the line first ahead of team owner Jim Hall to score a remakable team 1-2 finish.

Chaparral 2E, Goodwood Festival Of Speed

Jim qualified 3rd behind, John Surtees in the Lola, at Riverside in California. John and Jim both moved up a place after pole sitter Bruce McLaren retired with an ignition problem. Phil Hill could only qualify 8th and retired after seven laps with fuel pressure issues.

Going into the final round of the Challenge Phil Hill was tied on points with John Surtees with 5 other drivers including Jim Hall capable of winning the championship depending on a variety of finishing scenarios. Jim qualified on pole for the final round at Las Vegas but after a few laps his wing started flapping uncontrollably due to fatigue failure in the control mechanism causing his retirement from second after Surtees took a dominant lead from the start. Hill damaged his car and ran much of the race scraping over 4th place until his wing also failed. Surtees easily won the race and the Inaugural Can Am title ahead of Mark Donohue with Hill finishing out of the points his championnship chances were shot.

A Chaparral 2E chassis 2E002 was entered in three events at the 13th Bahamas National Speed Weeks for Jim Halls Chaparral Cars Inc partner Hap Sharp. Hap won the Governor’s Trophy & Nassau Tourist Trophy from pole, finished 5th in the Nassau Classic Race and a non running 4th, again from pole in the Nassau Trophy Race in which Hap had an accident.

In 2005 Jim Hall teamed up with Jim Musser, who had contributed to the design of the 2E, known to be Hall’s favourite, to build a ‘limited number’ of continuation Chaparral 2E’s for use by classic racers. More on the continuation cars can be seen on this link to the Chaparral Official Website.

My thanks to Kayemod Rob, Tony 2F-001 Pashley, Supersox and Allen Brown Duc-man and mariner at The Nostalgia Forum for helping me to conclude that the car featured today maybe the surviving original 2E but is most likely one of two continuation models.

Thanks for joining me on this Jim’s Favourite edition of “Gettin a li’l psycho on tyres”, I hope you will join me again tomorrow when I’ll be looking at a Can Am Lola T70 Spyder. Don’t forget to come back now !

Share

Balena Close, Poole, Dorset – Penske PC1 #001

After he had finished fabricating the Len Terry designed Eagle monocoques for All American Racers (AAR) in California, John Lambert returned to the Untied Kingdom and started a new business which was located on a small industrial estate outside Poole in Dorset where the rent was cheap. When Len Terry fell out with Frank Nichols they wound up Transatlantic Automotive Consultants based in Hastings where they had designed the AAR Eagle and Terry went to join Lambert, with whom he had worked at Lotus and AAR, in Poole starting a new business together called Design Auto.

In 1969 Len Terry started to design a series of stock block Formula 5000 open wheel cars called Leda’s, John Lambert looked after the construction of them in a facility off Balena Close on the Creekmore Industrial Estate on the outskirts of Poole, Dorset. When Leda Cars ran into financial difficulty they merged into the Malaya Garage Group in 1970. Three years later Malaya Garage Group did a deal with New Zealand racer Graham McRae selling the Leda Cars premises “lock, stock and barrel” with the cars manufactured now rebranded as McRae’s.

At around this time Roger “The Captain” Penske and Mark “Captain Nice” Donohue were experiencing many successes on the US racing scene which included three Trans Am championships, then only for manufacturers, driving the Captains Chevrolet Camaro in 1969 and AMC Javelins in 1970 and ’71.

In 1972 Mark won the Indy 500 in Roger Penske’s McLaren M16 and at the end of the year drove Penske’s McLaren M19 in the Canadian and US Grand Prix finishing a more than credible 3rd in his debut Grand Prix. The following year Mark and Roger won the Can Am championship with the “Turbo Panzer” Porsche 917/30. Having achieved pretty much everything in the US, including a NASCAR Winston Cup win at Riverside driving a Penske AMC Matador to become the last ‘road ringer’ to win a non oval race in that series back in 1973 Mark announced he would hang up his helmet at the end of the season.

Roger Penske made plans for a Formula One team in 1974 and sent Heinz Hofer to look at Graham McRae’s ‘low profile’ premises on the Creekmore Industrial Estate in Poole, Dorset UK as a possible base and concluded a deal for the premises. The Ford Cosworth DFV powered Penske PC1 was built to a design by Geoff Ferris and Mark Donohue was persuaded to come out of retirement to drive the car on it’s debut in the 1974 Canadian Grand Prix where he qualified 24th and finished 12th 2 laps down.

Penske Ford PC1, US Grand Prix, Watkins Glen

At the US Grand Prix, where Mark Donohue and Roger Penske fan, Brian Brown took today’s photograph of Mark in the PC1 at Watkins Glen the car started 14th on the grid, but retired after 27 laps with rear suspension problems. Brian recalls his first visit to a Grand Prix thus :-

“I was of course very excited to be seeing Mark race again, but being that it was my first live Formula One event, I was equally excited to be seeing Mario’s effort with Vel’s Parnelli Jones and the rest of the grid in person. We owned a Ferrari 365 GTB/4 Daytona and a 246 GT Dino at the time, so were very supportive of the Ferrari effort too.

My brother, friends and I spent a great deal of down time in the Kendall Garage watching the teams go about their business of working on the cars. One thing that was apparent was the absolutely professional presentation of the Penske team. Everything was spotless, just like their successful Indy Car counterpart that I’d observed in person since 1969 at Indianapolis. I was then, as now, a huge fan of Mark Donohue and Team Penske, but that aside, I always felt that they had too many positive resources not to be successful in Formula One.

I knew racing well enough to understand how tall the task Mark and the Penske team had ahead of them, but I also had the highest faith in their collective talents that I felt, given time, they would come right. I look back now and remember how I’d call in to our local ABC news tv affiliate to get the results of the races in 1975, always asking about the top six finishers along with Mark and Mario’s results.

Then came Austria and it was over for Mark and eventually Penske stopped the project – I was always appreciative that they carried on to get the victory with John Watson in Austria a year after Mark’s accident, something of a vindication for the mighty challenges that Team Penske faced in their Formula One foray. Watkins Glen 1974 was the last I ever saw Mark in person and despite the nearly 40 years that have passed, it seems like yesterday.”

Penske ended up building 3 chassis to the PC1 design chassis #001 seen here achieved a best 5th place finish, from 16th on the grid in the 1975 Swedish Grand Prix. Three races later Penske ditched the PC1 in favour of a March 751 which was raced until a new challenger until the new Penske PC3 was ready. As Brian alluded to above Mark Donohue was killed during practice for the 1975 Austrian Grand Prix after a tyre deflated pitching him off the track in to an accident which killed a marshal. Although Mark initially survived the incident he died the next day from a cerebral hemorrhage.

The debut of the Penske PC3 was delayed until the 1975 US Grand Prix where John Watson drove it in practice. Due to a misfire with the motor in the new car the team elected to wheel out today’s featured chassis one more time, John qualified 12th, finishing the race in 9th.

The following season Penske entered John in the PC3 and later PC4 models. With the latter the team won the 1976 Austrian Grand Prix, despite this success The Captain closed the Formula One program down at the end of 1976, deciding his future lay in the US racing seen where he would become the dominant force in Indy Car racing, with many of his winning cars being built in Poole, Dorset. Penske maintained facilities in Poole Dorset up until 2006. When the factory was closed one employee, Ivor, remained who had been part of the story going back to the Leda days, through the McRae years and into the Penske era.

In 2012 Brad Keslowski won his first NASCAR Championship driving a Penske entered Dodge a hitherto elusive goal on ‘The Captains’ to do list.

My thanks to Brian ‘ B² ‘ Brown for kindly agreeing to share his photograph; to kayemod, Nigel Beresford, Tim Murray, Tony Matthews, Dogearred and Doug Nye at The Nostalgia Forum for their help in piecing together the story behind Roger Penske’s presence in Poole, Dorset and a tenuous connection in the form of Lambert & Terry and their Leda Cars premises between the AAR Eagle and Penske Formula One efforts.

Thanks for joining me on this “Balena Close, Poole, Dorset” edition of “Gettin’ a li’l psycho on tyres”, I hope you will join me again tomorrow. Don’t forget to come back now !

PS Shortly before this blog was posted some confusion has come to light about which buildings in Poole Penske and McRae occupied and when, local resident kayemod and Nigel Beresford who worked for Penske have confirmed that Penske took over the Balena premises from McRae, while artist Tony Matthews is sure he visited a second facility a couple of miles away on Factory Road to do cutaway drawings for McRae and Penske is not so sure the Balena Close address is correct. If any further developments come forth I shall post them below, and if you know the answer to the riddle please do not hesitate to chime in.

PPS Nigel Beresford has kindly confirmed with another former Penske employee Nick Goozée that the Balena Close facility is the only one Penske purchased from Graham McRae. My thanks to Nigel and Nick for settling the matter so promptly.

PPPS

Balena Close, Poole, Dorset

Kayemod Rob from the Nostalgia Forum has kindly sent me this photo showing “how that corner of Balena Close looks today, the small unit to the right is the original Penske UK base, formerly McRae Cars. The three parked cars more or less cover the width of the premises. The ‘Elegance’ unit to the left of Penske was once FKS Fibreglass, later Griffin Design. My ex-Specialised Mouldings chum stylist Jim Clark worked at FKS, and as well as Penske’s stuff, they also did almost everything for the Gulf GT40s and Mirages among others, their unit extended leftwards to fill the corner of the block. Penske later rented an identical unit to the right of the pic, which doubled their floor area, after some of the dividing wall was removed, they used to run their F1 operation out of that.”

Thanks Rob.

Share