Tag Archives: 8

Shafer 8 – Rigling Buick

Like the Wonder Bread Special I looked at last year today’s featured chassis is credited as being the handy work of Herman Rigling who is said to have built no fewer than 8 of the 40 chassis that started the 1931 Indy 500.

Rigling Buick, Silverstone Classic,

Foremost of the 8 entries that Herman had a hand in building was the Buick powered #12 example driven Phil Schafer known as the Schafer 8 which started 23rd and finished 12th.

Rigling Buick, Heinz Bachmann, Silverstone Classic,

The following season Phil returned to Indy to drive the #33 Shafer 8 Rigling Buick from 26th on the grid through to an 11th place finish.

Rigling Buick, Silverstone Classic,

In 1933 Phil was absent from the Indy 500 grid having failed to qualify the #7 Abels Fink Auto Special in an officially sanctioned qualifying session, he did qualify on the morning of the race, but officials realised they had overstepped their jurisdiction by allowing the running of a qualifying session on race day morning !

However the #8 Abels Fink Auto Special, Phil’s Shafer 8 dating back to 1931 , was driven by H W Stubblefield from 10th on the grid to a fifth place finish.

Rigling Buick, Silverstone Classic,

Phil entered two Shafer 8’s for the 1934 Indy 500, it would appear his original Rigling Buick was entered as the #36 for Al Miller and his mechanician Pinky Donaldson while Phil and mechanician Earle Frost drove the #26 Shafer 8.

Rigling Buick, Silverstone Classic,

Al drove to a 6th place finish from 8th on the grid while Phil starting from an Indy 500 career high 6th on the grid recorded his only Indy 500 retirement with a broken cam shaft drive after completing 130 laps to be classified 16th in his last drive at the Brickyard.

Rigling Buick, Silverstone Classic,

Phil continued competing in the AAA championship until 1936 and continued to participate in the Pikes Peak Hillclimb until 1952.

Heinz Bachmann is seen at the wheel of a Rigling Buick above that is believed to be the Shafer 8 that Phil Shafer failed to qualify at Indy in 1933 but with which Paul won the AAA non Championship race at Elgin Illinois, as described at the end of the post by John Glenn Printz, and raced in his final Indy start in 1934.

My thanks to Vitesse2 and Michael Ferner at the Nostalgia Forum for their help with some of the details in today’s story, I highly recommend reading Michael’s retelling of the 1933 Indy 500 qualification saga part 1 of which appears linked here and part 2 linked here with the race report linked here.

Thanks for joining me on this “Shafer 8” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again tomorrow when I’ll be looking at a DIY Backie. Don’t forget to come back now !

145 Inch Prototype – Chrysler Imperial 8 CG LeBaron Roadster Prototype

In July 1930 Chrysler launched the second generation CG Imperial referred to in the sales literature as the Imperial 8.

Chrysler Imperial 8 CG LeBaron Roadster, Desert Classics, Palm Springs,

The 8 referred to the new L head 6.3 litre 384.8 cubic-inch, nine-main bearing straight 8 motor which developed 125 horsepower in it’s original incarnation.

Chrysler Imperial 8 CG LeBaron Roadster, Desert Classics, Palm Springs,

The CG’s chassis has an imposing 145″ wheel base, the same as a contemporary Duesenberg.

Chrysler Imperial 8 CG LeBaron Roadster, Desert Classics, Palm Springs,

Imperial 8’s could be ordered with either roadster, coupé, saloon / sedan or limousine bodies, the latter could be ordered with a way ahead of the curve dictaphone.

Chrysler Imperial 8 CG LeBaron Roadster, Desert Classics, Palm Springs,

This particular car photographed by Geoffrey Horton at the 2013 Desert Classic meet in Palm Springs is a 1931 CG with a prototype body by LeBaron.

Chrysler Imperial 8 CG LeBaron Roadster, Desert Classics, Palm Springs,

Unusually this roadster, which is believed to have been taken to the Chicago Auto Show, has no running boards.

Chrysler Imperial 8 CG LeBaron Roadster, Desert Classics, Palm Springs,

When the current owner bought this car he it restored in burgundy and silver in the absence of any knowledge as to the cars original colour scheme.

Chrysler Imperial 8 CG LeBaron Roadster, Desert Classics, Palm Springs,

The 145″ CG Imperial 8’s were only manufactured for one year the succeeding CL only had a 133″ wheel base.

My thanks to Geoffrey Horton for sharing his photographs.

Thanks for joining me on this “145 Inch Prototype” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again tomorrow. Don’t forget to come back now !

Jumpin’ Motorcycles – Singer 8 Junior Sports

Today’s featured 1928 Singer 8 Junior Sports is essentially mechanically identical to the 4 seat Coachbuilt saloon I looked at last week. The two cars were first registered a couple of months apart.

Singer 8 Junior Sports, VSCC, Loton Park

The boat tailed wire wheeled sports, originally fitted with cycle wings, running board, lights and a windscreen became known as the Porllock Sports after an unusual reliability record was set in 1930 by a Singer Sports on the famous 1 in 4 Porlock Hill in Devon where officials from Royal Automobile Club observed one being driven up and down the hill one hundred times in the space of 15 hours.

Singer 8 Junior Sports, VSCC, Loton Park

Singer Sports also had a multitude of other uses the Royal Signals Corps used one with a driver crouched in the cockpit as a hurdle for its motorcycle AND horse jumping display team.

The stripped car seen here at Loton Park is being driven by Ed Swain at Loton Park.

Thanks for joining me on this ‘Jumpin’ Motorcycles’ edition, of “Gettin’ a li’l psycho on tyres” I hope you will join me again tomorrow. Don’t forget to come back now !

Two Bearing Crankshaft – Singer 8 Junior

1 Reply

Like many pioneering manufacturers of motor cars Singer Motors Ltd was founded as a manufacturer of bicycles, by George Singer in 1874. By 1901 the company had diversified into producing powered tricycles which were soon followed by powered bicycles. Singer built their first car in 1905. Over the next four Tuesday’s GALPOT will be looking at four models from the interwar years.

Singer 8 Junior, Bristol Classic Car Show, Shepton Mallet

The Singer 8 Junior was launched in 1926. Initially only a four seat tourer was available, in blue with black wings / fenders.

Singer 8 Junior, Bristol Classic Car Show, Shepton Mallet

For tax purposes the 4 cylinder motor was classed as having 8 horsepower, it featured gravity fuel feed, a crank running in just two bearings, overhead cam shaft, 6 volt electrics, that produced 16.5 hp at 3250 rpm. The motor would be the progenitor of future Singer power units for three decades.

Singer 8 Junior, Bristol Classic Car Show, Shepton Mallet

Eventually a range of different body styles were offered including Two Seater Tourer, Sunshine Saloon, Coachbuilt Saloon as seen here, Fabric Saloon, a two plus two called the Sportsman’s Coupe and a boat-tailed Sports which helped sell 6000 8 Juniors a year between 1927 and 1931 which made Singer the third largest manufacturer in the UK behind Austin and Morris.

Singer 8 Junior, Bristol Classic Car Show, Shepton Mallet

There were plans for the German Aga “Aga Fahrzeugwerke GmbH” company to manufacture Singer 8 Juniors under license, in much the same way as BMW manufactured the Austin 8 under license, but these plans came to naught, after a single prototype had been built Aga disappeared.

Today’s featured 1928 saloon / sedan was purchased by the current owners in 2009 at the Bristol Classic Car Show in Shepton Mallet, it is known to have resided in Cornwall and Surrey about 20 years ago. The owners say the car is great fun to drive “and we always get there eventually.”

Thanks for joining me on this “Two Bearing Crankshaft” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again tomorrow. Don’t forget to come back now !

The Love Boat – Citroén Ami 8 Estate

2 Replies

Today’s Continental Curiosity is yet another 2 cylinder from France. Based on the chassis and upgraded mechanical running gear of the utilitarian Citroén 2CV the slightly less utilitarian and rustic Ami was launched in the Spring of 1961 with the more powerful 22 hp flat 2 motor that was an option only on the 2CV which it was eventually intended to replace.

Despite poor initial sales due to it’s lack of refinements after a series of upgrades which included rear sliding windows and an increase to 32 hp for the two cylinder models sales eventually overtook those of the 2CV and the Ami topped the sales charts in France for several years.

There was a more powerful 4 cylinder Ami Super which was described as a ‘Q car par excellence’ by one British Magazine, however French Tax regulations combined with it’s utilitarian underpinnings did not result in significant additional sales of the Ami Super. A further prototype Ami M35 Coupé series was also built in limited numbers for preferential customers powered by a single rotary Comotor Wankel engine.

This particular 1976 Ami seen at Goodwood Festival of Speed nick named “The Love Boat” was acquired by present owner and Top Gear presenter James May, who allegedly ‘competed’ in a Majorcan Classic Rally with glamour model Madison Welch in the co drivers seat.

Production of the Ami spread from France to Spain and Argentina, with Complete Knock Down kits also assembled in Africa and Chile with world wide sales topping 1.8 million when production came to an end in 1978. The Citroén 2CV, on which the Ami was based and which the Ami was intended to replace, continued in production until 1990.

Thanks for joining me on this “The Love Boat” edition of “Gettin’ a li’l psycho on tyres”, I hope you will join me again tomorrow. Don’t forget to come back now !

Ferrari Mondial Cabriolet

Ferari replaced the 308 GT4 2 + 2 I looked at last week with the Mondial model, like the one seen here at Bristol Italian Auto Moto Festibal, in 1980. The Cabriolet was not introduced until 1983.

Pininfarina was chosen to design the replacement for the Bertone designed 308GT4, the Mondial featured a steel body built by Carrozzeria Scaglietti to sit over a steel box section space frame.

The second generation Mondial t was introduced in 1989 with smaller tidier side intakes and bumpers in matching body colours.

The engine and gearbox of the Mondial is mounted, for ease of maintenance, on a subframe which makes taking the engine out to change the spark plugs a much easier process, this innovation has transferred to all subsequent V8 Ferrari’s.

Originally the Mondial 8 was powered by a 4 cam 2 valve per cylinder 3 litre 183 cui V8, in 1982 QV Quattrovalvole, four valve per cylinder heads were fitted to the 3 litre / 183 cui motors. In 1985 these motors were increased in bore and stroke to give 3185 cc / 194 cui for the 3.2 Mondial models with 280 hp up from 240 hp on the original Mondial motor. 1989 saw the introduction of 3.4 litre / 207 cui motors which produced 300 hp.

The T designation introduced in 1989, seen on today’s featured 1990 car, denotes a change in the power train layout from transversely mounted engine and gearbox of all models up to 1989 to a longitudinally mounted engine and transverse gearbox that allowed the engine to be mounted lower in the chassis which consequently improved the handling. This engine gearbox layout was also carried over to future Ferrari V8 models.

Thanks for joining me on this drop top edition of ‘Gettin’ a li’l psycho on tyres’ I hope you will join me again tomorrow. Don’t forget to come back now !

Suspension by Chris Lawrence – Morgan Aero 8

1 Reply

Up until 2000 the last time Morgan had introduced a new body style was 1964, only 26 glass fibre bodied +4+ cars were built over 4 years and since that time Morgan have successfully focused on improving a design that dates back to 1936.

In 2000 Morgan launched a genuinely ground up new ‘retro’ design the Morgan Aero 8, a clear nod to Morgan’s successful past with an eye on the future.

The heart of the Aero 8 was a 325 hp 4.4 litre / 268.5 cui BMW V8, with fake Morgan cam covers, capable of accelerating the car from rest to 60 mph in 4.5 seconds and on to a top speed of over 170 mph.

The all new aluminium chassis, completely unrelated to the steel ladder chassis of earlier models, was developed with the help of Morgan’s best known racing exponent and tuner Chris Lawrence. Unusually for a vehicle with this kind of performance the chassis and suspension are so stiff that the suspension does not have anti roll / sway bars.

The Aero 8 has since been offered as a limited edition coupé the Aero Max, of which just 100 have been built and the Targa topped Aero SuperSports. Production of these cars is coming to an end at the Morgan factory, in anticipation of a new Morgan 4 wheel model.

An insight into some of the work of Chris Lawrence, who passed away on August 13th, can be found on this link.

Thanks for joining me on this edition of ‘Gettin’ a lil’ psycho on tyres, I hope you will join me again tomorrow. Don’t forget to come back now !